On this page

For the printed stand option, proceed to Display installation.

STL file

The STL file contains both the stand and bottom cap. It is provided only to customers who purchase the kit without a printed stand. The stand design is not open source.

Usage terms

The STL file is licensed to the kit purchaser for personal use. You may modify the file and print the stand and bottom cap for your own Serin Link, including replacement parts.

You may provide the file to a print service solely to make these parts for you, provided the service agrees not to reuse or share it and deletes it after completing the order.

Except for this print-service use, you may not share, upload, or redistribute the original or modified files. Selling files or printed parts, other than the permitted print-service work, requires written permission from Serin Labs.

Print settings

Print one stand and one bottom cap using these settings:

Setting	Value
Material	Panchroma™ Matte PLA.
Walls	4.
Layer height	0.16 mm or finer.
Nozzle diameter	0.4 mm.
Orientation	Flat on the bottom face.
Supports	Stand only, using Bambu Studio's default support settings.
Support interface	PETG.

Remove the stand's supports by hand.

Print the stand flat on its bottom face. Enlarge image.