# Rooms and zones — Serin Link

> Use Serin Link with up to seven rooms. Switch the active zone, pair another controller, or remove a room from Serin Link.

Source: https://serin-labs.com/link/zones.html
Last updated: 2026-11-10

With multiple paired controllers, the selected zone name appears on the home screen:

[![Home screen with a zone name](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/home-zone-chip.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/home-zone-chip.png)

Home screen with a zone name

Swipe left or right on the home screen to change zones. Or tap or hold the zone name, turn the knob to a zone, and push to select it. Tapping a zone icon selects it directly. Select **Back** and push, tap **Return**, or tap the Back icon to leave unchanged.

The picker shows each zone’s temperature, operation, and connection state. **No reading yet** and **–** mean no temperature is available.

Serin Link keeps contacting every paired controller and sending its sensor readings, even with the screen dark. It visits different Wi-Fi channels in the background as needed and resumes these updates after a restart.

[![Zone selection screen](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-picker.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-picker.png)

Zone selection screen

[![Zone selection screen waiting for a reading](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-picker-waiting.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-picker-waiting.png)

Zone selection screen waiting for a reading

[![Zone selection screen with Back highlighted](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-return.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-return.png)

Zone selection screen with Back highlighted

Scroll sideways to read all columns.

| Marker / state | Meaning |
| --- | --- |
| Green / Online | Serin Link can exchange data with the controller. |
| Amber / Fault | The controller is reachable but reports a · [heat pump fault](https://serin-labs.com/link/troubleshooting.html#heat-pump-fault) · . |
| Blue / Checking | Serin Link is trying to contact the controller. |
| Grey / Stale | No current data; the controller last used another radio channel. |
| Red / Offline | Serin Link cannot exchange data with the controller. |

**· Active** marks the selected zone. Stale and Offline zones show dim readings and **Last ·** before operating details because that information is no longer current.

[![Zone selection screen with one zone offline](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-picker-status.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/zones-picker-status.png)

Zone selection screen with one zone offline

## Add or forget a zone

To add a zone:

1. Open pairing on the intended controller; see [First power-on and pairing](https://serin-labs.com/link/pairing.html#first-power-on-and-pairing).
2. Open **Settings → Controller** on Serin Link.
3. Tap **Add zone** or push the knob.
4. Keep the controller’s pairing window open until the search completes.

To forget one zone:

1. Select it, open **Settings → Controller**, and check the zone name.
2. Hold the knob through **Hold to confirm** until the arc completes and **Unpairing…** appears. Release early to cancel; touch cannot forget a zone.

[![Active zone, Add zone, and the forget hint](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/link-zone.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/link-zone.png)

Active zone, Add zone, and the forget hint

Serin Link removes only the active zone pairing and restarts. To remove all zones and preferences, use [Reset Link](https://serin-labs.com/link/maintenance.html#reset-link).

For pairing failures or a zone limit, see [Pairing recovery](https://serin-labs.com/link/troubleshooting.html#pairing-recovery).

**Source details**

Source: `serin-link`
Manual: `docs/manual/MANUAL.md`
Source revision: `b354d9ab980d0a1f6ee511b2de4669a8f890b33a`
