# Display and control settings — Serin Link

> Set Serin Link brightness, idle display, temperature units, and Child Lock. Adjust night behavior and control preferences.

Source: https://serin-labs.com/link/settings.html
Last updated: 2026-11-10

These preferences affect Serin Link, separately from heat pump settings.

## Settings

From the home screen, push the knob to open the Menu, select **Settings**, and push again.

[![Settings — Brightness](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/settings.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/settings.png)

Settings — Brightness

Turn to an item and push to use its action. With touch, tap its icon, then the central action. Brightness enters adjustment directly; the Advanced icon opens Advanced directly.

**Controller** starts pairing when unpaired. Otherwise, use **Add zone**, even if the selected controller is offline. Tap **Offline** for its explanation. Select **Back** and push or tap **Return** to return to the screen that opened Settings.

[![Settings — Return to the Menu](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/settings-return.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/settings-return.png)

Settings — Return to the Menu

If the controller is offline, pushing **Wi-Fi**, **HomeKit**, **Matter**, **Home**, or **Room Sensor** opens **Controller offline**. Tap **Go to Controller** to highlight **Controller**.

## Brightness

1. In Settings, highlight **Brightness**.
2. Push the knob to enter adjustment mode.
3. Turn the knob to change brightness.
4. Push the knob to leave adjustment mode.

The range is 10–100%. Alternatively, tap or slide along the track below the brightness value. Idle and Night settings can reduce actual brightness below this value. Refer to [Advanced settings](https://serin-labs.com/link/settings.html#advanced-settings).

## Advanced settings

Open **Settings → Advanced**, then turn to an item.

[![Settings — Open Advanced](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/settings-advanced.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/settings-advanced.png)

Settings — Open Advanced

Select **Back**, then push or tap **Return** to return to Settings.

[![Advanced — Return to Settings](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-return.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-return.png)

Advanced — Return to Settings

## Units, Idle screen, Night, and Transitions

These items use the same adjustment procedure:

1. Highlight the item in Advanced.
2. Push the knob to enter adjustment mode.
3. Turn the knob to select an option.
4. Push the knob to leave adjustment mode.

Alternatively, tap the item’s ring icon. Then tap the required option in the center. A touch selection also enters adjustment mode. Push the knob before you use knob turns to browse other items.

[![Temperature unit options](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-units.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-units.png)

Temperature unit options

**Units:** select **°F** or **°C**. Changes apply immediately. Serin Link converts the target temperature to the new unit. Fahrenheit uses whole degrees, so the converted target can round to the nearest degree. If you switch back before you change the target, Serin Link restores the original target exactly.

[![Idle screen options](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-idle.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-idle.png)

Idle screen options

**Idle screen:** select **Glance** for a dim temperature display, or **Off** for a dark screen after inactivity.

[![Night options](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-night.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-night.png)

Night options

**Night:** select **On** to permit the controller’s night signal to limit brightness. Select **Off** to ignore that signal. Serin Link receives the night-active state from the controller. This screen does not set night hours.

Display behavior varies by board. See the [display reference](https://serin-labs.com/link/technical-reference.html#display-behavior).

[![Transition options](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-transitions.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-transitions.png)

Transition options

**Transitions:** **On** by default for fade-out/fade-in between screens. Select **Off** for immediate screen changes. Your selection is saved across restarts.

Tap **i** on Child Lock, Idle screen, Night, or Transitions for an explanation. Tap **Close** or push the knob to dismiss it.

## Child Lock

1. In Advanced, highlight **Child Lock**.
2. Push the knob to enter adjustment mode.
3. Turn clockwise to select **On**.
4. Push the knob to leave adjustment mode.
5. Hold the knob to return home.

Alternatively, tap **On** in the center of the Child Lock screen.

[![Child Lock options](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-lock.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/advanced-lock.png)

Child Lock options

Child Lock blocks home-screen turns, pushes, taps, and swipes that change controls or open menus. A blocked action can show **Hold to unlock**. Unlock before opening offline details or Settings, including from **CONTROLLER OFFLINE** or **HEAT PUMP OFFLINE** warnings.

Pairing and the home-screen Wi-Fi offer remain available while locked.

[![Locked home screen](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/home-locked.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/home-locked.png)

Locked home screen

To unlock, wake the home screen and hold the knob until the confirmation arc completes, then release.

[![Unlock confirmation arc](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/home-unlock.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/home-unlock.png)

Unlock confirmation arc

It locks again after about 30 seconds without activity. To disable the lock, unlock first, then open **Settings → Advanced → Child Lock** and tap **Off**. With the knob, push to adjust, turn counterclockwise to Off, and push to finish.

## Screen dimming and idle display

After approximately 30 seconds without activity, supported displays become dim. After approximately two minutes, the **Idle screen** setting applies. **Glance** shows a dim room temperature display. **Off** makes the screen dark. Refer to [Advanced settings](https://serin-labs.com/link/settings.html#advanced-settings) for the display differences.

A dark screen does not turn Serin Link off. Controller communication and room-sensor updates continue.

[![Idle display with room temperature](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/idle-glance.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/idle-glance.png)

Idle display with room temperature

The controller can also dim or turn off the display. See the [display reference](https://serin-labs.com/link/technical-reference.html#display-behavior) for controller overrides and differences between displays.

When the screen is dim, the first touch on the home screen only activates it. A knob turn or push activates the screen and also acts, for example by changing the target temperature. When the idle display shows, the first touch, knob turn, or knob push only activates the screen.

**Source details**

Source: `serin-link`
Manual: `docs/manual/MANUAL.md`
Source revision: `b354d9ab980d0a1f6ee511b2de4669a8f890b33a`
