# Pair your controller — Serin Link

> Pair Serin Link with a compatible controller using ESPHome, HomeKit-compatible, or Matter-compatible firmware. Follow pairing progress or cancel safely.

Source: https://serin-labs.com/link/pairing.html
Last updated: 2026-11-10

An assembled Serin Link is ready to pair. A Serin Controller added to the order ships unflashed and unpaired. Complete [Controller setup](https://serin-labs.com/setup.html) for app control, or [setup without a smart-home app](https://serin-labs.com/link/manual.html#using-link-without-a-smart-home-app) for local control.

The standard ESPHome browser build provides **Pair Serin Link** in Home Assistant and the controller web interface. If it is absent, install a build with Serin Link support, or enable **Connect a Serin Link** in the [YAML generator](https://serin-labs.com/esphome/generate-yaml.html) and [install the configuration](https://serin-labs.com/controller/customize-esphome.html).

[![Ready to pair](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/pairing-ready.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/pairing-ready.png)

Ready to pair

1. Start pairing on the intended Serin Controller with the applicable instruction:
    - With HomeKit-compatible or Matter-compatible firmware, select **Pair** in the controller web interface’s **Link** card.
    - With ESPHome, select **Pair Serin Link** in Home Assistant or in the enabled ESPHome web interface.
2. On Serin Link, tap **Pair** or push the knob.

[![Pairing in progress](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/anim-pairing-search.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/anim-pairing-search.png)

Pairing in progress

Keep the controller’s pairing window open; reopen it if it closes. Tap **Cancel** or push the knob to stop searching. If the controller has already acknowledged the final confirmation, Serin Link waits up to a quarter-second for its reply and may complete pairing and restart.

[![Paired](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/pairing-done.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/pairing-done.png)

Paired

After pairing, Serin Link restarts and shows the heat pump state. To add rooms, see [Zones](https://serin-labs.com/link/zones.html#zones-more-than-one-room).

**Source details**

Source: `serin-link`
Manual: `docs/manual/MANUAL.md`
Source revision: `b354d9ab980d0a1f6ee511b2de4669a8f890b33a`
