# Knob and touchscreen gestures — Serin Link

> Look up Serin Link knob and touchscreen controls: turn, tap, swipe, press, and hold to confirm changes or navigate menus.

Source: https://serin-labs.com/link/gestures.html
Last updated: 2026-11-10

The result of a control action depends on the screen and the selected item:

Scroll sideways to read all columns.

| Gesture | What it does |
| --- | --- |
| **Turn the knob** | Changes the target temperature on the home screen or the highlighted item in a menu. Changes the fan or vane setting when the control is ready for adjustment. Does not open another screen. |
| **Tap, or push the knob** | Opens an item, selects an item, or applies a change. On the home screen, a knob push opens the Menu. |
| **Tap the left or right side of the home screen** | Decreases or increases the set temperature by one step. |
| **Hold (approximately 0.6 seconds)** | Keep the knob pressed. On the home screen, opens Zones when available. On most other screens, returns home. See the screen-specific actions below. |
| **Long hold until the progress indicator fills** | Confirms the action shown on screen, such as unlocking controls, forgetting a zone, or changing the Wi-Fi network. Release early to cancel. For Reset Link, this opens another confirmation before anything is erased. |
| **Flick up** · on the home screen | Opens the · [Airflow](https://serin-labs.com/link/controls.html#airflow) · controls. |
| **Slide** · on an Airflow control | Changes the fan speed or vane angle. Slide up or down on the fan bar or the vertical vane. Slide left or right on the horizontal vane. |
| **Flick down** · on the Airflow screen, outside the controls | Returns to the screen that opened Airflow. |
| **Swipe left or right** · on the home screen | Changes the selected zone. |

**Back** returns to the previous screen. Use the knob for holds. Touch holds also unlock Child Lock, suppress the home-screen Wi-Fi offer, or start network change from the Wi-Fi status. Forgetting a zone and Reset Link require the knob. A **flick** is quick; a **slide** starts on the control being adjusted.

The action depends on the current screen:

- **Home:** hold the knob to open Zones when available.
- **Pairing:** hold to cancel a search. On other pairing screens, use the on-screen buttons.
- **Update:** hold to cancel when cancellation is available. Once the update is being verified or the device is restarting, holding does not cancel it.
- **Dialog:** hold to close the dialog without its action.
- **Wi-Fi setup:** follow the on-screen hold instruction to leave setup.
- **Most other screens:** hold to return home.

For a confirmed action, hold until the **confirmation arc** fills; release early to cancel. Reset Link opens a second confirmation and erases nothing until you confirm there.

[![Confirmation arc during a long hold and cancellation after early release](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/anim-hold-confirm.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/anim-hold-confirm.png)

Confirmation arc during a long hold and cancellation after early release

## Menu navigation

The **Menu** has a ring of controls: **Home**, **Mode**, **Airflow**, **Zones**, **Settings**, and **Back**. **Zones** shows only with two or more zones. **Airflow** shows only when the heat pump has fan or vane controls.

1. On the home screen, tap the center or push the knob to open the Menu.
2. Turn the knob to highlight a control.
3. Push the knob or tap the control to open it.

**Home** returns to the home screen.

[![Menu](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/menu.png)](https://serin-labs.com/assets/link/manual/b354d9ab980d0a1f6ee511b2de4669a8f890b33a/figures/menu.png)

Menu

**Source details**

Source: `serin-link`
Manual: `docs/manual/MANUAL.md`
Source revision: `b354d9ab980d0a1f6ee511b2de4669a8f890b33a`
