# Serin Controller setup for Apple Home

> Connect a Mitsubishi mini-split to Apple Home with Serin Controller and the free, open-source HomeKit-compatible firmware. Join Wi-Fi and pair the controller.

Source: https://serin-labs.com/homekit/setup.html
Last updated: 2026-11-10

Pair your Serin Controller with Apple Home using the free, open-source **HomeKit-compatible firmware**. If you installed the Matter-compatible build for Apple Home instead, use the [smart home app setup guide](https://serin-labs.com/matter/setup.html).

Different firmware? [Choose your guide](https://serin-labs.com/controller/firmware.html).

**Continue an existing setup**

- **Not installed in the indoor unit yet?** Install it in the indoor unit.
- **Installed, but not on Wi-Fi?** Join your home network.
- **Wi-Fi connected, but not paired?** Add your controller to your app.
- **Already paired and installed?** Check that the unit responds.

## Before you start

- A compatible indoor unit and controller with **this guide's firmware installed**. If the firmware is not installed yet, use the [flash tool](https://serin-labs.com/flash.html?platform=homekit) on a computer with a USB-C data cable.
- A 2.4 GHz home Wi-Fi network and its password.
- An iPhone or iPad. Remote access and automations require an Apple Home hub such as an Apple TV or HomePod.

Note

**Uncertified accessory.** The Home app asks you to confirm an accessory that is not Apple-certified.

## 1 Install the controller

Warning

**Power off at the breaker.** Leave it off while the unit is open. Disconnect USB before connecting CN105.

Follow the [installation guide](https://serin-labs.com/controller/install.html) to connect the CN105 cable, position the controller, and replace the cover before you restore power.

## 2 Join your home Wi-Fi

**Already connected in the flash tool?** Continue to app setup.

1. On your phone, join **Serin-XXXX**, using the password `serinlabs`. The suffix is unique to your controller.
2. The setup page opens. If it does not, browse to `http://192.168.4.1` while still connected to the controller's setup network.
3. Enter your home Wi-Fi name and password. The controller saves them and restarts on your network.
4. Reconnect your phone to the home network. If you need the controller's IP address, check the router's connected-device list.

**Another way to join Wi-Fi, or a missing setup network**

You can also enter the controller's Wi-Fi details from a computer [over USB](https://serin-labs.com/controller/recovery.html#reset) using the [flash tool's Wi-Fi option](https://serin-labs.com/flash.html). You do not need to reinstall firmware just to change the network. If the setup network does not appear, use [Wi-Fi troubleshooting](https://serin-labs.com/troubleshooting.html#ap-missing).

## 3 Add to Apple Home

**Already paired?** Check control.

1. With your phone on the same network as the controller, open `http://Serin-XXXX.local`. Use the suffix from its setup network name, or use its IP address from the router.
2. Open the HomeKit panel in the web interface. Scan its pairing QR code with your iPhone or iPad, or use the saved pairing shortcut in this step.
3. Follow the Home app's add-accessory prompts and confirm the uncertified-accessory notice. Assign the thermostat to its room.

**Enter the code manually**

In the Home app, choose **+ > Add Accessory > More options**. Select **Mini Split XXXX** and enter the setup code from the controller's HomeKit panel.

If the accessory was paired before, see [pairing troubleshooting](https://serin-labs.com/troubleshooting.html#pairing-fails). Do not erase all settings as the first step.

[![A mini-split thermostat tile in Apple Home](https://serin-labs.com/assets/mitsubishi-mini-split-apple-home-thermostat-tile.webp)](https://serin-labs.com/assets/mitsubishi-mini-split-apple-home-thermostat-tile.webp)

The controller appears as a thermostat in Apple Home. [View full-size screenshot](https://serin-labs.com/assets/mitsubishi-mini-split-apple-home-thermostat-tile.webp).

## 4 Check that the unit responds

1. Check that the app reports the room temperature.
2. Change the mode or target temperature and confirm the indoor unit responds.

If the app connects but commands have no effect, use [the CN105 checks](https://serin-labs.com/troubleshooting.html#hvac-no-response). App pairing does not verify the cable's data connection.

Once control works, [set up a room sensor](https://serin-labs.com/controller/room-sensors.html#placement) or [configure Auto mode](https://serin-labs.com/controller/web-interface.html#auto-mode). The [update](https://serin-labs.com/controller/updates.html) and [Wi-Fi and reset](https://serin-labs.com/controller/maintenance.html) guides cover later maintenance.
