# Collect diagnostics for support

> Collect a controller summary and a live log so Serin Labs support can investigate a connection, pairing or control problem.

Source: https://serin-labs.com/controller/support-info.html
Last updated: 2026-10-27

Collect diagnostics before resetting the controller.

## Record what happened

- The indoor-unit model, controller board and installed firmware version.
- The app or browser you used, the action you tried and what happened instead.
- Any light pattern or error message, and completed [troubleshooting checks](https://serin-labs.com/troubleshooting.html).

## Copy diagnostics for support

On HomeKit-compatible or Matter-compatible firmware:

1. Open the web interface and expand **About**.
2. Select **Copy Diagnostics**.
3. Paste the text into your message or the [contact form](https://serin-labs.com/contact.html).

[![About section listing board, firmware version, IP address, mDNS name, MAC, last reset, boots, crashes, memory and drop counts, a Copy Diagnostics button, and a Device Events list](https://serin-labs.com/assets/content/860/media/webui-about.png.a4b9e843f1bf.webp)](https://serin-labs.com/assets/media/webui-about.png)

Wi-Fi Drops and Pump Link Drops count since the last restart. Boots and Crashes count since the last factory reset. [View full-size screenshot](https://serin-labs.com/assets/media/webui-about.png).

The summary includes firmware, network and device addresses, connection state, error codes and recent events. It omits your Wi-Fi password and setup code.

## Capture a live log

On HomeKit-compatible or Matter-compatible firmware, capture a log while reproducing the problem:

1. Open the web interface and expand **Diagnostics · Logs**.
2. Under **Log Level**, select **Debug** for the most detail.
3. Leave the page open and make the problem happen again.
4. Select **Copy** under **Live Log** and paste the text into your message.

[![Diagnostics · Logs section with Log Level set to Debug, Copy and Clear buttons, and several live log lines](https://serin-labs.com/assets/content/860/media/webui-logs.png.0bae7b94f49c.webp)](https://serin-labs.com/assets/media/webui-logs.png)

The log keeps the last 200 lines, and only while the page is open. **Debug** returns to **Info** when the controller restarts. [View full-size screenshot](https://serin-labs.com/assets/media/webui-logs.png).

## Capture ESPHome logs

1. Open the ESPHome dashboard and select **Logs** on the controller's card.
2. Repeat the action that causes the problem.
3. Copy the relevant messages and include the firmware version and configuration options you use.

The controller's web page also provides logs when its web server is enabled. Optional [diagnostic sensors](https://serin-labs.com/controller/diagnostics.html#heat-pump) can be added through the YAML generator.

## Send a support request

Send the information through the [contact form](https://serin-labs.com/contact.html). Remove passwords and other secrets from logs or custom YAML before sharing.

## Back up or restore settings

See [Back up and restore settings](https://serin-labs.com/controller/backups.html) before a firmware change or reset.

## Understand a device event

Look up device events, restart reasons and counters in the [diagnostics reference](https://serin-labs.com/controller/diagnostics.html#events).
